We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
1. HS series slurry pump is developed for the steady pumping of substantial abrasive, large density slurries with nominal servicing demands. The wearing areas are manufactured of ultra chrome or and rubber. It will preserve high performance over the put on existence of its factors.
two. The metal soaked areas and rubber types can be interchangeable for managing different liquids or slurries.
3. HS slurry pumps are obtainable in measurements ranging from 1 inch to eighteen inch discharge and feature higher performance efficiency able of circulation costs from ten.8 to 5400 m³/h and heads up to one hundred twenty five meters for substantial head models.
Characteristics:
one. Cylindrical structure of bearing assembly: convenient to adju EPT the room in between impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
2. Interchangeable anti-abrasive wet components created of high-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs supply substantial functioning pressure capabilities
and an additional evaluate of safety.
four. The discharge department can be oriented to any eight positions at the interval of forty five levels
five. Different drive kinds: DC(immediate relationship), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
S EPT manage, and many others
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Typical Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Development |
| • Alumina Sector | • Energy Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet dimensions (inch) | Content for Put on Parts | Circulation Charge (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | 12.6~28.8 | 3.5~8 | 6~68 | 1200~3800 | 152 |
| R | 10.8~twenty five.2 | three~seven | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.five | M | 32.4~seventy two | 9~20 | 6~fifty eight | 1200~3200 | 184 |
| R | 25.2~54 | 7~15 | five.5~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~seventy five.six | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | four/three | M | 86.4~198 | 24~55 | nine~fifty two | one thousand~2200 | 245 |
| R | seventy nine.2~180 | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | six/4 | M | 162~360 | forty~a hundred | twelve~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~90 | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/6 | M | 360~828 | 100~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | seven~49 | 400~one thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | one hundred seventy~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | twelve~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~forty four | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | thirty | 1.5/one | M | 16.2~34.two | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | sixty eight.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/4 | M | 324~720 | ninety~two hundred | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | one hundred thirty~280 | 20~94 | 500~1000 | 711 |
For the substance of putting on parts,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to contact us any time for specifics.
Your inquiry will get our prompt consideration and reaction !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the outlined substitute parts contained herein are not sponsored, authorized, or manufactured by the OEM.
